Peer-reviewed Paper, 2023

  • J. Zhang, N. Hori, A. Takemura, Effect of natural biomass fillers on the stability, degradability, and elasticity of crop straws liquefied polyols-based polyurethane foams, Journal of Applied Polymer Science 140(3), e53324 (2023).Link
  • I. Palle, V. Lodin, A. A. Mohd Yunus, S. H. Lee, P. Md Tahir, N. Hori, P. Antov, A. Takemura, Effects of NCO/OH Ratios on Bio-Based Polyurethane Film Properties Made from Acacia mangium Liquefied Wood, Polymers 15, 1154 (2023).Link
  • C. Chang, H. Noda, Y. Hamada, G. Wang, C. Huang, T. Yamaguchi, Normal-stress-dependent Frictional Weakening and Microstructure in Sheared Granular Medium of Halite, submitted.
  • T. Yamaguchi, Y. Himeno, S. Yabe, Fast to slow slip transition in analogue experiments of earthquakes, submitted.
  • A. Omura, H. Takano, T. Tomita, T. Yamaguchi, S. Oka, The ventral adhesion of quadruped-walking cuttlefish: why Metasepia tullbergi can walk without slipping?, submitted.
  • 山口哲生，粘着剤の剥離過程における多階層動力学 (Multi-scale dynamics in debonding process of pressure-sensitive adhesives), 日本接着学会誌，受理済．

    • Review, Commentary Article, 2023

  • 山口哲生，エラストマーの粘着・剥離，エラストマー研究最前線─新素材・自己修復・強靱化と高度解析─，日本化学会編，化学同人(2023).

    • Peer-reviewed Paper, 2022

  • Y. Sumino, T. Saito, T. Hatano, T. Yamaguchi, S. Ide, Spatio-temporal chaos of one-dimensional thin elastic layer with the rate-and-state friction law, Physical Review Research 4(4), 043115 (2022). arXiv:2012.01799.Link
  • T. Yamaguchi, M. Morishita, T. G. Sano, M. Doi, Wetting dynamics of viscoelastic solid films, Soft Matter 18, pp.4905-4912 (2022).Link
  • K. Imakawa, Y. Ochiai, K. Aoki, N. Hori, A. Takemura, T. Yamaguchi, Mechanical Properties of Hybrid Joints in Timber Structures, Journal of Wood Science 68(1), pp.1-8 (2022).Link
  • 山口哲生，家敷拓弥，森田健敬，澤江義則，超音速すべり摩擦(Sliding Friction at Intersonic Sliding Velocities)，日本物理学会誌 77(7), 464 (2022).Link
  • J. Zhang, N. Hori, A. Takemura, Stability and degradation of four agricultural wastes liquefied polyols based polyurethane foams, Journal of Applied Polymer Science 139(37), e52893 (2022).Link

    • Review, Commentary Article, 2022

  • 山口哲生，粘着・剥離現象の基礎，R&D支援センター(2022).
  • 山口哲生，メカニカルメタマテリアルの巨大変形挙動，メタマテリアルの設計、作製と新材料、デバイス開発への応用 .技術情報協会(2022).Link
  • 山口哲生，トポロジー制御による網目構造の強靭化と高機能化，Cellulose Communications 29(1), pp.17-22 (2022).

    • Peer-reviewed Paper, 2021

  • M. Ilangovan, V. Guna, C. Hu, A. Takemura, Z. Leman, N. Reddy, Dehulled coffee husk-based biocomposites for green building materials, Journal of Thermoplastic Composite Materials 34(12), pp.1623-1638 (2021).
  • T. Yamaguchi, A. Akamine, Y. Sawae, On/off switching of adhesion in gecko-inspired adhesives, Biosurface and Biotribology 7(2), pp.1-7 (2021). https://doi.org/10.1049/bsb2.12003
  • J. Zhang, N. Hori, A. Takemura, Reinforcement of agricultural wastes liquefied polyols based polyurethane foams by agricultural wastes particles, Journal of Applied Polymer Science 138(23), 50583 (2021).
  • T. Murakami, N. Sakai, S. Yarimitsu, K. Nakashima, T. Yamaguchi, Y. Sawae, A. Suzuki, Evaluation of influence of changes in permeability with aging on friction and biphasic behaviors of artificial hydrogel cartilage, Biotribology 26, 100178 (2021).
  • Y. Sawae, T. Morita, K. Takeda, S. Onitsuka, J. Kaneuchi, T. Yamaguchi, J. Sugimura, Friction and wear of PTFE composites with different filler in high purity hydrogen gas, Tribology International 157, 106884 (2021).

    • Peer-reviewed Paper, 2020

  • J. Zhang, N. Hori, A. Takemura, Thermal and time regularities during oilseed rape straw liquefaction process to produce bio-polyol, Journal of Cleaner Production 277, 124015 (2020).
  • H. Shinmori, M. Kubota, T. Morita, T. Yamaguchi, Y. Sawae, Effects of Synovial Fluid Constituents on Friction between UHMWPE and CoCrMo, Tribology Online 15(4), pp.283-292 (2020).
  • S. Chen, N. Hori, M. Kajiyama, A. Takemura, Compatibilities and properties of poly lactide/poly (methyl acrylate) grafted chicken feather composite: Effects of graft chain length, Journal of Applied Polymer Science 137(34), pp.48981-48981 (2020).
  • S. Chen, N. Hori, M. Kajiyama, A. Takemura, Thermal responsive poly(N-isopropylacrylamide) grafted chicken feather keratin prepared via surface initiated aqueous Cu(0)-mediated RDRP: Synthesis and properties, International Journal of Biological Macromolecules 153, pp.364-372 (2020).
  • T. Yashiki, T. Morita, Y. Sawae, T. Yamaguchi, Subsonic to Intersonic Transition in Sliding Friction for Soft Solids, Physical Review Letters. 124, 238001 (2020).
  • Z. Li, N. Hori, A. Takemura, A comparative study of depositing Cu-BTC metal-organic framework onto cellulosic filter paper via different procedures. Cellulose 27(11), pp.6537-6547 (2020).
  • Z. Li, N. Hori, A. Takemura, Synthesis and characterization of Cu-BTC metal-organic frameworks onto lignocellulosic fibers by layer-by-layer method in aqueous solution, Cellulose 27(3), pp.1733-1744 (2020).
  • T. Yamaguchi, Y. Onoue, Y. Sawae, Topology and Toughening of Sparse Elastic Networks, Physical Review Letters. 124, 068002 (2020).

    • Peer-reviewed Paper, 2019

  • S. Chen, N. Hori, M. Kajiyama, A. Takemura, Graft modification of methyl acrylate onto chicken feather via surface initiated Cu(0)‐mediated reversible‐deactivation radical polymerization, Journal of Applied Polymer Science 136(48), pp.48246-48246 (2019).
  • Y. Kusaka, M. Mizukami, T. Yamaguchi, N. Fukuda, H. Ushijima, Patterning defects in high-speed reverse offset printing: Lessons from contact dynamics, Journal of Micromechanics and Microengineering. 29, 045001 (2019).
  • J. Zhang, N. Hori, A. Takemura, Optimization of agricultural wastes liquefaction process and preparing bio-based polyurethane foams by the obtained polyols, Industrial Crops and Products 138, pp.111455-111455 (2019).
  • J. Zhang, N. Hori, A. Takemura, Optimization of preparation process to produce polyurethane foam made by oilseed rape straw based polyol, Polymer Degradation and Stability 166, pp.31-39 (2019).
  • T. Yamaguchi, Reduction and Control of Friction in Hydrogels, Surfactants in Tribology. Biresaw, G. & Mittal, K. L. (eds.). Vol. 6 (2019).
  • N. Itagaki, D. Kawaguchi, Y. Oda, F. Nemoto, N. L. Yamada, T. Yamaguchi, K. Tanaka, Surface Effect on Frictional Properties for Thin Hydrogel Films of Poly(vinyl ether), Macromolecules. 52, pp.9632-9638 (2019).

    • Peer-reviewed Paper, 2018

  • I. Palle, N. Hori, T. Iwata, A. Takemura, Optimization of polyol production via liquefaction from Acacia mangium and analysis of the polyols by traditional methods and two-dimensional correlation spectroscopy, Holzforschung 72(6), pp.451-458 (2018).
  • Z. Ling, Y. Omura, N. Hori, T. Iwata, A. Takemura, In-situ chemical structure analysis of aqueous vinyl polymer solution-isocyanate adhesive in post-cure process by using Fourier transform near infrared spectroscopy, International Journal of Adhesion and Adhesives 81, pp.56-64 (2018).
  • T. Yamaguchi, C. Creton, M. Doi, Simple model on debonding of soft adhesives, Soft Matter. 14, pp.6206-6213 (2018).
  • T. Yamaguchi, R. Sato, Y. Sawae, Propagation of Fatigue Cracks in Friction of Brittle Hydrogels, Gels 4, 53 (2018).
  • D. A. Dillard, T. Yamaguchi, Special tests, Handbook of Adhesion Technology: Second Edition. Springer International Publishing, 1-2, pp.593-612 (2018).

    • Peer-reviewed Paper, 2017

  • T. Murakami, S. Yarimitsu, N. Sakai, K. Nakashima, T. Yamaguchi, Y. Sawae, Importance of adaptive multimode lubrication mechanism in natural synovial joints. Tribology International 113, pp.306-315 (2017).
  • F. Fahma, N. Hori, T. Iwata, A. Takemura, PVA Nanocomposites Reinforced with Cellulose Nanofibers from Oil Palm Empty Fruit Bunches (OPEFBs), Emirates Journal of Food and Agriculture 29(5), pp.323-329 (2017).
  • T. Murakami, S. Yarimitsu, N. Sakai, K. Nakashima, T. Yamaguchi, Y. Sawae, A. Suzuki, A. Morina, A. Neville, Liskiewicz, Superior lubrication mechanism in poly(vinyl alcohol) hybrid gel as artificial cartilage, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 231, 9, pp.1160-1170 (2017).
  • D. Necas, Y. Sawae, T. Fujisawa, K. Nakashima, T. Morita, T. Yamaguchi, M. Vrbka, I. Krupka, M. Hartl, The Influence of Proteins and Speed on Friction and Adsorption of Metal/UHMWPE Contact Pair, Biotribology. 11, pp.51-59 (2017).
  • T. G. Sano, T. Yamaguchi, H. Wada, Slip Morphology of Elastic Strips on Frictional Rigid Substrates, Physical Review Letters. 118, 178001 (2017).